Daily: the 10-second habit
Keep a squeegee in the shower and wipe the glass top to bottom after the last shower of the day. It removes the water before minerals dry on the glass, which is 90% of the battle. Crack the door or run the fan so everything dries.
Weekly clean
Spray a non-abrasive glass or shower cleaner (or a 50/50 mix of white vinegar and water), wipe with a microfiber cloth or soft sponge, rinse and squeegee. Wipe the hardware with a soft damp cloth and dry it.
Hard-water spots
Lake Michigan water, used by Chicago and many suburbs, is moderately hard; homes on well water often see much more spotting. For built-up spots, let a vinegar solution sit for a few minutes before wiping, or use a cleaner made for mineral deposits that’s labeled safe for glass. Never scrape.
What to avoid
- Abrasive powders, scouring pads and steel wool; they scratch glass permanently.
- Razor blades on coated glass.
- Harsh or acidic cleaners on hardware finishes (especially matte black and brass): rinse well and dry.
- Letting cleaner pool on silicone and seals for long periods.
Seals, sweeps & coatings
Vinyl sweeps and seals wear with normal use. If your door starts to drip after several years, new seals usually fix it; we replace them at an inexpensive service rate. A protective coating applied to new glass makes water bead and run off, which cuts cleaning time dramatically, especially with hard water.




